Parameters |
Max Power Dissipation |
470mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADM706 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
250μA |
Nominal Supply Current |
350μA |
Power Dissipation |
470mW |
Max Supply Current |
350μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
2.63V |
Reset Timeout |
160ms Minimum |
Min Reset Threshold Voltage |
2.55V |
Max Reset Threshold Voltage |
2.7V |
Undervoltage Threshold |
1.25V |
Overvoltage Threshold |
2.7V |
Number of Monitored Inputs |
1 |
Reset Delay Time |
280 ms |
Length |
4.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
ADM706RARZ-REEL7 Overview
It is mounted through 8 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3V. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 8. This power management system has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 250μA volt supply current. It is always advisable to use ADM706, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 3/5V volts in order to work correctly. Voltage supervisor can work with a supply temperature of 350μA at the most. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM706RARZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM706RARZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM706RARZ-REEL7 Voltage Supervisors applications.
- Sensitive sensors
- Solar power charger
- Leakage current detection
- Battery cars
- DVR
- Utility meter
- Electronics installed in the vehicle
- Stable power system
- Transformer load monitoring equipment
- Personal computers