ADM706TARZ
| Parameters | |
|---|---|
| Reset Delay Time | 280 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 350μA |
| Power Dissipation | 470mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
ADM706TARZ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. There is a Tube-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 250μA for the power management. You can always use ADM706, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 350μA can be used with this power management. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM706TARZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM706TARZ Applications
There are a lot of Analog Devices Inc. ADM706TARZ Voltage Supervisors applications.
- Utility meter
- DSP
- External alarm
- Precision measurement
- Important electronics for automotive protection
- Power distribution systems of operating room
- Kitchen appliances
- Digitally controlled LDO regulators circuit
- Microprocessor system
- Power distribution systems of ICU
