ADM706TARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 250μA |
| Power Dissipation | 470mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 1.25V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM706TARZ-REEL Overview
Power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 3.3V. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 250μA for the power management. For similar manage ics search of the manufacturer, you can always refer to ADM706, the base PMIC number. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature that PMIC chip can work with is 350μA. The power management monitors 1 inputs at once.
ADM706TARZ-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM706TARZ-REEL Applications
There are a lot of Analog Devices Inc. ADM706TARZ-REEL Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Data storage applications
- Radio
- Dash board
- Digitally controlled LDO regulators circuit
- Network equipment
- Electric heating appliances
- Leakage protection
- Kitchen appliances
- Personal computers
