ADM708AR-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 250μA |
| Power Dissipation | 470mW |
| Max Supply Current | 250μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.4V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM708AR-REEL Overview
There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 2 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 240. In a 5V supply voltage, the power management conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 8 pins on power management. 8 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Push-Pull. The supervisor's supply current is specified to 250μA. For similar manage ics search of the manufacturer, you can always refer to ADM708, the base PMIC number. To operate this power management, you will need at least 5V volts of power. At most, voltage supervisor can operate at a supply temperature of 250μA. There are a total of 1 monitored inputs on the power management.
ADM708AR-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM708AR-REEL Applications
There are a lot of Analog Devices Inc. ADM708AR-REEL Voltage Supervisors applications.
- Detection of phase imbalance
- Functional modules
- Radar
- Magnetic resonance imaging
- Medical-specific insulation monitor
- FPGA design
- Detection of phase loss
- Network equipment
- Personal computers
- Telecommunications equipment
