ADM708RANZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 350μA |
| Power Dissipation | 727mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM708RANZ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. By Through Hole, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. This power management system has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. There is a 250μA supply current present in the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by ADM708. This power management requires 3/5V power to work. A maximum supply temperature of 350μA can be used. There are a total of 1 monitored inputs on the power management.
ADM708RANZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM708RANZ Applications
There are a lot of Analog Devices Inc. ADM708RANZ Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Rechargeable batteries
- Refrigeration
- Household appliances
- Transformer load monitoring equipment
- Network equipment
- Consumer electronics
- Satellite navigation
- Magnetic resonance imaging
- Electronics installed in the vehicle
