ADM708SARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 190μA |
| Power Dissipation | 470mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM708SARZ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tube. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. The supervisor's supply current is specified to 250μA. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using ADM708, the base power ics number. The power management must be powered by 5V volts to function properly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 350μA. There are 1 inputs monitored at once on the power management.
ADM708SARZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM708SARZ Applications
There are a lot of Analog Devices Inc. ADM708SARZ Voltage Supervisors applications.
- Microprocessor system
- Battery cars
- Rechargeable batteries
- Network equipment
- Display equipment
- Automotive permanent magnet synchronous motors
- Insulation fault location system
- Electronics installed in the vehicle
- Linux and server computing
- Utility meter
