ADM708TARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 350μA |
| Power Dissipation | 470mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM708TARZ Overview
A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 5V supply voltages. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. The power management's supply current is 250μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. You can always use ADM708, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 350μA can be used. There are a total of 1 monitored inputs on the power management.
ADM708TARZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM708TARZ Applications
There are a lot of Analog Devices Inc. ADM708TARZ Voltage Supervisors applications.
- Efficient information transmission
- Microcontroller system
- Precision measurement
- Automotive power systems
- Detection of phase loss
- Electrical fire monitoring system
- DSP
- External alarm
- Radio
- Data storage applications
