ADM708TARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 350μA |
| Power Dissipation | 470mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 160ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 1.25V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM708TARZ-REEL Overview
Power management is mounted through 8 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. Supplied with a operating current of 250μA, this PMIC is capable of fully function as specified. There are other features such as MANUAL RESET OPTION to name a few. You can always use ADM708, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 3.3/5V power to work. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 350μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM708TARZ-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current
ADM708TARZ-REEL Applications
There are a lot of Analog Devices Inc. ADM708TARZ-REEL Voltage Supervisors applications.
- Linux and server computing
- Analog circuit
- Network equipment
- Dash board
- Power distribution systems of operating room
- Consumer electronics
- Detection of phase sequence
- Urban rail transit weak current power monitoring
- Battery cars
- Transformer load monitoring equipment
