ADM800MARNZ
| Parameters | |
|---|---|
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM800 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 700mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 9.9mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
ADM800MARNZ Overview
There are 16 terminals on this power management that allow it to be mounted. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 16-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 4.5V-voltage supply. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 16 pins. There are 16 pins on the supervisor. Supply voltage (Vsup) should be at least 0V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. There is a supply current of 100μA for the power management. It is always advisable to use ADM800, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. A maximum supply temperature of 100μA can be used. There are 1 inputs monitored at once on the power management.
ADM800MARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
ADM800MARNZ Applications
There are a lot of Analog Devices Inc. ADM800MARNZ Voltage Supervisors applications.
- Stable power system
- Analog circuit
- Electrical fire monitoring system
- Battery cars
- Household appliances
- Linux and server computing
- Solar power charger
- Battery cars
- Personal computers
- Automotive permanent magnet synchronous motors
