ADM802MANZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADM802 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 400mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM802MANZ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tube, power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 3 channels, each of which can be used independently. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be NOT APPLICABLE. During operation, the power ic is supplied with a voltage of 5V. Power management is included in the Through Hole mount. It has a total of 8 pins that are attached to IC management. 8 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Through Hole. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 100μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM802, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 100μA. The power management monitors 1 inputs at once.
ADM802MANZ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current
ADM802MANZ Applications
There are a lot of Analog Devices Inc. ADM802MANZ Voltage Supervisors applications.
- Radar
- Urban rail transit weak current power monitoring
- DSP
- Insulation fault location system
- Fire equipment power monitoring system
- Important electronics for automotive protection
- Precision measurement
- Microcontroller system
- Satellite navigation
- Solar power charger
