ADM809LAKS-REEL7
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
ADM809LAKS-REEL7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-70, SOT-323 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 240. A supply voltage of 5V is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 3 pins. There are 3 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 60μA. For similar manage ics search of the manufacturer, you can always refer to ADM809, the base PMIC number. In order to operate this power management, it requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM809LAKS-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM809LAKS-REEL7 Applications
There are a lot of Analog Devices Inc. ADM809LAKS-REEL7 Voltage Supervisors applications.
- Sensitive sensors
- Leakage protection
- Important electronics for automotive safety
- Consumer electronics
- Power distribution systems of operating room
- Power communication system
- Multi-voltage system
- Medical-specific isolation transformer
- Electrical fire monitoring system
- Efficient information transmission
