ADM809LARTZ-REEL
| Parameters | |
|---|---|
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
ADM809LARTZ-REEL Overview
This power management consists of 3 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 3 pins in it. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM809, which is the base power ics number. To operate this power management, you will need at least 5V volts of power. A maximum supply temperature of 60μA can be used. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM809LARTZ-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM809LARTZ-REEL Applications
There are a lot of Analog Devices Inc. ADM809LARTZ-REEL Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Detection of phase loss
- Microcontroller system
- Smartphones
- Precision measurement
- Urban rail transit weak current power monitoring
- Utility meter
- Rechargeable batteries
- Leakage protection
- Power distribution systems of ICU
