ADM809SARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Max Output Current | 20mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
| Height | 1.02mm |
| Length | 2.9mm |
| Width | 1.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM809SARTZ-REEL7 Overview
As you can see, this power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 3 pins in it. There are 3 pins on the supervisor. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 60μA for the power management. It is always advisable to use ADM809, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 60μA at the most. The power management has 1 monitored inputs.
ADM809SARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM809SARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM809SARTZ-REEL7 Voltage Supervisors applications.
- Detection of phase loss
- External alarm
- Automotive permanent magnet synchronous motors
- Fire equipment power monitoring system
- Analog circuit
- Multi-voltage system
- Military electronics
- Magnetic resonance imaging
- Leakage current detection
- Battery-powered equipment
