ADM809TAKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM809TAKSZ-REEL7 Overview
It is mounted through 3 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 60μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM809, which is the base power ics number. Voltage supervisor can work with a supply temperature of 60μA at the most. There are 1 inputs monitored at once on the power management.
ADM809TAKSZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM809TAKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM809TAKSZ-REEL7 Voltage Supervisors applications.
- Important electronics for automotive protection
- Radar
- Power communication system
- Medical-specific isolation transformer
- Detection of phase imbalance
- Power distribution systems of infant care room
- Functional modules
- Microcontroller system
- Unattended substation automation
- Medical-specific insulation monitor
