ADM810JAKSZ-REEL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.93V |
| Max Reset Threshold Voltage | 4.06V |
| Threshold Voltage | +4V |
| Undervoltage Threshold | 3.93V |
| Overvoltage Threshold | 4.06V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM810JAKSZ-REEL7 Overview
This power management consists of 3 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SC-70, SOT-323 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 3. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. To find similar IC managements from the manufacturer, you can always search by ADM810. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature is 60μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM810JAKSZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM810JAKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM810JAKSZ-REEL7 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Important electronics for automotive protection
- Insulation fault location system
- Smart meter
- Unattended substation automation
- DSP
- Power communication system
- Cloud computing
- Personal computers
- Automotive power systems
