ADM810LARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 20 μs |
| Height | 1.02mm |
| Length | 2.9mm |
| Width | 1.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM810LARTZ-REEL7 Overview
It is mounted through 3 terminals on the power management. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 5V. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 3 pins on power management. This power management system has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 60μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using ADM810, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature that PMIC chip can work with is 60μA. The power management has 1 monitored inputs.
ADM810LARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM810LARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM810LARTZ-REEL7 Voltage Supervisors applications.
- Network equipment
- Important electronics for automotive protection
- Smart meter
- Detection of phase sequence
- Urban rail transit weak current power monitoring
- Leakage protection
- Functional modules
- Microcontroller system
- Utility meter
- Linux and server computing
