ADM810MAKSZ-REEL7
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.38V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
ADM810MAKSZ-REEL7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-70, SOT-323 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 3 pins on IC management. Power managment ic pin count is 3. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM810, which is the base power ics number. To be able to work, this power management requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 60μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM810MAKSZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM810MAKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM810MAKSZ-REEL7 Voltage Supervisors applications.
- Telecommunications equipment
- DSP
- Leakage protection
- FPGA design
- Solar power charger
- Medical-specific insulation monitor
- Multi-voltage system
- Consumer electronics
- Radio
- Set top box
