ADM810RARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 840 ms |
| Height | 1.02mm |
| Length | 2.9mm |
| Width | 1.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM810RARTZ-REEL7 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3V. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. It is always advisable to use ADM810, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3V volts of power. A maximum supply temperature of 60μA can be used with this power management. In total, there are 1 inputs on the power management that can be monitored.
ADM810RARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM810RARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM810RARTZ-REEL7 Voltage Supervisors applications.
- Display equipment
- Automotive power systems
- DSP
- Radar
- Smartphones
- Personal computers
- Power distribution systems of infant care room
- Data storage applications
- Electric heating appliances
- Military electronics
