Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-253-4, TO-253AA |
Number of Pins |
4 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
200mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM811 |
Output |
Push-Pull, Totem Pole |
Pin Count |
4 |
Power Supplies |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
15μA |
Nominal Supply Current |
10μA |
Power Dissipation |
200mW |
Max Supply Current |
10μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.08V |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
3.03V |
Max Reset Threshold Voltage |
3.14V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3.03V |
Overvoltage Threshold |
3.14V |
Number of Monitored Inputs |
1 |
Reset Delay Time |
700 ms |
Length |
2.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADM811-3TARTZ-RL7 Overview
It is mounted through 4 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.3V volt supply. Surface Mount mounts power management on the wall. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 4 pins on the board. 4 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 15μA. A similar IC managements number of the manufacturer can always be found by using ADM811, the base power ics number. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 10μA at the most. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM811-3TARTZ-RL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811-3TARTZ-RL7 Applications
There are a lot of Analog Devices Inc. ADM811-3TARTZ-RL7 Voltage Supervisors applications.
- Stable power system
- Refrigeration
- Battery-powered equipment
- Power distribution systems of operating room
- Computer applications
- Household appliances
- Efficient information transmission
- Smart meter
- Kitchen appliances
- DVR