ADM811LART-REEL7
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 200mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.54V |
| Max Reset Threshold Voltage | 4.72V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.54V |
| Overvoltage Threshold | 4.72V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
ADM811LART-REEL7 Overview
Power management is mounted through 4 terminals. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find TO-253-4, TO-253AA functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 240. In a 5V supply voltage, the power management conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 4 pins on power management. 4 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM811, which is the base power ics number. The power management must be powered by 5V volts to function properly. The maximum supply temperature is 15μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM811LART-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811LART-REEL7 Applications
There are a lot of Analog Devices Inc. ADM811LART-REEL7 Voltage Supervisors applications.
- Functional modules
- Leakage protection
- Data storage applications
- Linux and server computing
- Microcontroller system
- Power distribution systems of CCU
- External alarm
- Detection of phase loss
- Battery cars
- emergency room
