ADM811LARTZ-REEL
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 200mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.54V |
| Max Reset Threshold Voltage | 4.72V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.54V |
| Overvoltage Threshold | 4.72V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
ADM811LARTZ-REEL Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-253-4, TO-253AA functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 4 pins are located on this power management. This power management system has 4 pins. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 15μA for the power management. It is always advisable to use ADM811, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 15μA. There are 1 inputs monitored at once on the power management.
ADM811LARTZ-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811LARTZ-REEL Applications
There are a lot of Analog Devices Inc. ADM811LARTZ-REEL Voltage Supervisors applications.
- Telecommunications equipment
- Military electronics
- Electrical fire monitoring system
- Radio
- Leakage current detection
- Power distribution systems of CCU
- Multi-voltage system
- Digitally controlled LDO regulators circuit
- Unattended substation automation
- Important electronics for automotive safety
