ADM811SART-REEL7
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 2.98V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 2.98V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
ADM811SART-REEL7 Overview
Power management is mounted through 4 terminals. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a TO-253-4, TO-253AA package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 240 is specified for the package. During operation, the power ic is supplied with a voltage of 3.3V. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 4 pins are present in total in this power management. 4 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 15μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ADM811, the base power ics number. There is a requirement for 3.3V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA. There are a total of 1 monitored inputs on the power management.
ADM811SART-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811SART-REEL7 Applications
There are a lot of Analog Devices Inc. ADM811SART-REEL7 Voltage Supervisors applications.
- Military communications
- Satellite navigation
- Analog circuit
- Detection of phase sequence
- Rechargeable batteries
- Display equipment
- Microprocessor system
- Data storage applications
- Linux and server computing
- Telecommunications equipment
