Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-253-4, TO-253AA |
Number of Pins |
4 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
200mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM811 |
Output |
Push-Pull, Totem Pole |
Pin Count |
4 |
Power Supplies |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
15μA |
Nominal Supply Current |
10μA |
Power Dissipation |
200mW |
Max Supply Current |
10μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.93V |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
2.88V |
Max Reset Threshold Voltage |
2.98V |
Threshold Voltage |
+2.93V |
Undervoltage Threshold |
2.88V |
Overvoltage Threshold |
2.98V |
Number of Monitored Inputs |
1 |
Reset Delay Time |
560 ms |
Height |
1.07mm |
Length |
3.04mm |
Width |
1.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADM811SARTZ-REEL7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached TO-253-4, TO-253AA functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 3.3V supply voltage, the power management conducts. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 4 pins that are attached to IC management. Power managment ic pin count is 4. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 15μA. It is always advisable to use ADM811, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3.3V power to power this power management. The maximum supply temperature is 10μA. In total, there are 1 inputs on the power management that can be monitored.
ADM811SARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811SARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM811SARTZ-REEL7 Voltage Supervisors applications.
- Leakage protection
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- Magnetic resonance imaging
- Computer applications
- Linux and server computing
- WiFi router
- Rechargeable batteries
- Power communication system
- Detection of phase sequence