ADM811TART-REEL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.03V |
| Max Reset Threshold Voltage | 3.14V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.03V |
| Overvoltage Threshold | 3.14V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM811TART-REEL7 Overview
There are 4 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 240. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 4 pins. This power management system has 4 pins. Supply voltage (Vsup) should be at least 1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 15μA supply current present in the power management. You can always use ADM811, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 3.3V power to work. A maximum supply temperature of 10μA can be used. On the power management, 1 inputs are monitored.
ADM811TART-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811TART-REEL7 Applications
There are a lot of Analog Devices Inc. ADM811TART-REEL7 Voltage Supervisors applications.
- Functional modules
- Medical-specific isolation transformer
- Battery cars
- Electronics installed in the vehicle
- Refrigeration
- Analog circuit
- Electric heating appliances
- Microcontroller system
- Solar power charger
- Display equipment
