ADM811TARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.03V |
| Max Reset Threshold Voltage | 3.14V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.03V |
| Overvoltage Threshold | 3.14V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM811TARTZ-REEL7 Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 3.3V supply voltages. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 4 pins. This power management system has 4 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 15μA. To find similar IC managements from the manufacturer, you can always search by ADM811. It requires 3.3V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 10μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM811TARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM811TARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM811TARTZ-REEL7 Voltage Supervisors applications.
- Battery cars
- Detection of phase loss
- Radio
- Important electronics for automotive safety
- Kitchen appliances
- Magnetic resonance imaging
- Household appliances
- emergency room
- Consumer electronics
- Microcontroller system
