ADM812SARTZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM812 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 2.98V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 2.98V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM812SARTZ-REEL Overview
There are 4 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find TO-253-4, TO-253AA functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 4 pins on power management. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 15μA supply current present in the power management. It is always advisable to use ADM812, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 3.3V watts is required for the operation of this power management. A maximum supply temperature of 10μA can be used with this power management. There are a total of 1 monitored inputs on the power management.
ADM812SARTZ-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM812SARTZ-REEL Applications
There are a lot of Analog Devices Inc. ADM812SARTZ-REEL Voltage Supervisors applications.
- Satellite navigation
- Military communications
- Consumer electronics
- Kitchen appliances
- Telecommunications equipment
- Important electronics for automotive safety
- Smartphones
- Display equipment
- Unattended substation automation
- Analog circuit
