ADM812SARTZ-REEL7
| Parameters | |
|---|---|
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 2.98V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 2.98V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM812 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
ADM812SARTZ-REEL7 Overview
Power management is mounted through 4 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-253-4, TO-253AA package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 4 pins. There are 4 pins on the supervisor. IC management can only work with a supply voltage of 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 15μA. For similar manage ics search of the manufacturer, you can always refer to ADM812, the base PMIC number. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 10μA can be used. In total, there are 1 inputs on the power management that can be monitored.
ADM812SARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM812SARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM812SARTZ-REEL7 Voltage Supervisors applications.
- Satellite navigation
- Precision measurement
- Power distribution systems of infant care room
- Battery-powered equipment
- Multi-voltage system
- Smartphones
- DVR
- Dash board
- DSP
- Consumer electronics
