ADM812TARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM812 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.03V |
| Max Reset Threshold Voltage | 3.14V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.03V |
| Overvoltage Threshold | 3.14V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 560 ms |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM812TARTZ-REEL7 Overview
It is mounted through 4 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a TO-253-4, TO-253AA package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 4 pins on power management. This power management system has 4 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 15μA. To find similar IC managements from the manufacturer, you can always search by ADM812. A power supply of 3.3V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA. There are 1 inputs monitored at once on the power management.
ADM812TARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
ADM812TARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM812TARTZ-REEL7 Voltage Supervisors applications.
- Automotive power systems
- Important electronics for automotive safety
- Military communications
- DSP
- Power distribution systems of ICU
- Consumer electronics
- Refrigeration
- Radar
- Dash board
- Personal computers
