ADM823LYKSZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 24μA |
| Max Supply Current | 24μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM823LYKSZ-R7 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 5-TSSOP, SC-70-5, SOT-353 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 4.75V supply voltage, the power management conducts. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 24μA. You can always use ADM823, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly. Voltage supervisor can work with a supply temperature of 24μA at the most. On the power management, there are a total of 1 inputs that are monitored.
ADM823LYKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823LYKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823LYKSZ-R7 Voltage Supervisors applications.
- Detection of phase sequence
- Magnetic resonance imaging
- Detection of phase loss
- DSP
- Medical-specific insulation monitor
- Power distribution systems of operating room
- emergency room
- Fire equipment power monitoring system
- Unattended substation automation
- Insulation fault location system
