ADM823LYRJZ-R7
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 24μA |
| Max Supply Current | 24μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
ADM823LYRJZ-R7 Overview
It is mounted through 5 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 4.75V is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. There are 5 pins on the supervisor. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 24μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM823, which is the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum supply temperature is 24μA. The power management monitors 1 inputs at once.
ADM823LYRJZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823LYRJZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823LYRJZ-R7 Voltage Supervisors applications.
- Data storage applications
- Display equipment
- Linux and server computing
- Consumer electronics
- Efficient information transmission
- Set top box
- Digitally controlled LDO regulators circuit
- emergency room
- DSP
- Unattended substation automation
