ADM823SYKSZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 12μA |
| Max Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 40 μs |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM823SYKSZ-R7 Overview
Power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for 5-TSSOP, SC-70-5, SOT-353 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 3V supply voltages. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 5 pins. 5 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 24μA. It is always advisable to use ADM823, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3.3V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 12μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM823SYKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823SYKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823SYKSZ-R7 Voltage Supervisors applications.
- Leakage protection
- Transformer load monitoring equipment
- Microprocessor system
- Refrigeration
- Military communications
- emergency room
- Set top box
- Medical-specific insulation monitor
- Magnetic resonance imaging
- Display equipment
