ADM823TYKSZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 12μA |
| Max Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM823TYKSZ-R7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 5-TSSOP, SC-70-5, SOT-353 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When a supply voltage of 3.15V is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 24μA. You can always use ADM823, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 3.3V power to work. The maximum supply temperature that PMIC chip can work with is 12μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM823TYKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823TYKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823TYKSZ-R7 Voltage Supervisors applications.
- Power distribution systems of infant care room
- Embedded computing
- Battery cars
- Detection of phase imbalance
- Electronics installed in the vehicle
- Fire equipment power monitoring system
- Important electronics for automotive protection
- Kitchen appliances
- Multi-voltage system
- Dash board
