Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.15V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM823 |
Output |
Push-Pull, Totem Pole |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Power Supplies |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
24μA |
Nominal Supply Current |
10μA |
Output Current |
20mA |
Max Supply Current |
12μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
3.08V |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
3.04V |
Max Reset Threshold Voltage |
3.11V |
Undervoltage Threshold |
3.04V |
Overvoltage Threshold |
3.11V |
Number of Monitored Inputs |
1 |
Reset Delay Time |
280 ms |
Height |
1.45mm |
Length |
3.1mm |
Width |
1.7mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADM823TYRJZ-R7 Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 3.15V for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 24μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to ADM823, the base PMIC number. A power supply of 3.3V watts is required for the operation of this power management. The maximum supply temperature that PMIC chip can work with is 12μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM823TYRJZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823TYRJZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823TYRJZ-R7 Voltage Supervisors applications.
- Leakage protection
- Military communications
- Automotive permanent magnet synchronous motors
- Microprocessor system
- Sensitive sensors
- Detection of phase loss
- Magnetic resonance imaging
- DVR
- Important electronics for automotive safety
- Solar power charger