ADM823YYKSZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.25V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 12μA |
| Max Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.19V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.16V |
| Max Reset Threshold Voltage | 2.22V |
| Undervoltage Threshold | 2.16V |
| Overvoltage Threshold | 2.22V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM823YYKSZ-R7 Overview
This power management consists of 5 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 5-TSSOP, SC-70-5, SOT-353 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 2.25V is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 24μA volt supply current. It is always advisable to use ADM823, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 12μA. There are 1 inputs monitored at once on the power management.
ADM823YYKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM823YYKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM823YYKSZ-R7 Voltage Supervisors applications.
- Linux and server computing
- Automotive permanent magnet synchronous motors
- Military electronics
- Important electronics for automotive protection
- Microprocessor system
- Dash board
- Electric heating appliances
- Stable power system
- Smartphones
- Multi-voltage system
