ADM825TYKSZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM825 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 24μA |
| Nominal Supply Current | 12μA |
| Max Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM825TYKSZ-R7 Overview
As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a 5-TSSOP, SC-70-5, SOT-353 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3.15V supply voltage, the power management conducts. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Push-Pull during operation. It is estimated that the voltage supervisor's supply current is 24μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM825, which is the base power ics number. To be able to work, this power management requires 3.3V volts of power. At the most, voltage supervisor can work with a supply temperature of 12μA. On the power management, 1 inputs are monitored.
ADM825TYKSZ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM825TYKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADM825TYKSZ-R7 Voltage Supervisors applications.
- Power distribution systems of operating room
- Medical-specific insulation monitor
- DC stabilized power supply module
- Automotive permanent magnet synchronous motors
- Important electronics for automotive safety
- emergency room
- Digitally controlled LDO regulators circuit
- Magnetic resonance imaging
- Smartphones
- Utility meter
