ADM8321WAY30ARJZR7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Watchdog Circuit |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM8321 |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 900mV |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Min Reset Threshold Voltage | 2.97V |
| Max Reset Threshold Voltage | 3.03V |
| Threshold Voltage | +3 |
| Reset Delay Time | 1 ms |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8321WAY30ARJZR7 Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. This IC power shares lots of benefits with other Watchdog Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 1.2V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. In total, the power management has 5 pins in it. 5 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 900mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. As far as the supply current of the power management is concerned, it is 10μA. You can always use ADM8321, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 20μA. As you may know, this PMIC comes from the well-known Automotive series product line.
ADM8321WAY30ARJZR7 Features
Watchdog Circuit type
Minimum supply voltage of 900mV
10μA operating supply current
ADM8321WAY30ARJZR7 Applications
There are a lot of Analog Devices Inc. ADM8321WAY30ARJZR7 Voltage Supervisors applications.
- Transformer load monitoring equipment
- Power distribution systems of operating room
- Microprocessor system
- Power distribution systems of ICU
- Rechargeable batteries
- Electric heating appliances
- Dash board
- Detection of phase imbalance
- Display equipment
- Battery cars
