ADM8324WCA29ARJZR7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Watchdog Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM8324 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 900mV |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.901V |
| Max Reset Threshold Voltage | 2.959V |
| Reset Delay Time | 140 ms |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8324WCA29ARJZR7 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. This power management is made up of 8 channels which are available in a series format. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Watchdog Circuit products as well. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 5. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 900mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 10μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ADM8324, the base power ics number. Voltage supervisor can work with a supply temperature of 20μA at the most. As you can see, this IC power comes from the well-known Automotive series of products.
ADM8324WCA29ARJZR7 Features
Watchdog Circuit type
Minimum supply voltage of 900mV
10μA operating supply current
ADM8324WCA29ARJZR7 Applications
There are a lot of Analog Devices Inc. ADM8324WCA29ARJZR7 Voltage Supervisors applications.
- Important electronics for automotive safety
- Radar
- emergency room
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Set top box
- Utility meter
- Automotive permanent magnet synchronous motors
- Smartphones
- Cloud computing
