ADM8690AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM8690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 400mW |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADM8690AN Overview
Power management is mounted through 8 terminals. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 2 channels. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. When 5V is applied to the power ic, it conducts. The mount is provided by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 8. Power managment ic pin count is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.75V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 200μA. To find similar IC managements from the manufacturer, you can always search by ADM8690. There is a requirement for 5V power to power this power management. At most, voltage supervisor can operate at a supply temperature of 200μA. On the power management, 1 inputs are monitored.
ADM8690AN Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
200μA operating supply current
ADM8690AN Applications
There are a lot of Analog Devices Inc. ADM8690AN Voltage Supervisors applications.
- Efficient information transmission
- Detection of phase loss
- Kitchen appliances
- Satellite navigation
- Data storage applications
- DC stabilized power supply module
- Power communication system
- Detection of phase imbalance
- Functional modules
- Power distribution systems of infant care room
