ADM8690ANZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADM8690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 400mW |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8690ANZ Overview
As you can see, this power management is mounted through 8 terminals. Power management is packaged in a Tube way. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 2 channels. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. When 5V is applied to the power ic, it conducts. Through Hole mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. 8 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 4.75V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Through Hole mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 200μA volt supply current. To find similar IC managements from the manufacturer, you can always search by ADM8690. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature that PMIC chip can work with is 200μA. There are a total of 1 monitored inputs on the power management.
ADM8690ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
200μA operating supply current
ADM8690ANZ Applications
There are a lot of Analog Devices Inc. ADM8690ANZ Voltage Supervisors applications.
- Detection of phase imbalance
- Computer applications
- Data storage applications
- Medical-specific insulation monitor
- Important electronics for automotive protection
- Multi-voltage system
- Consumer electronics
- Medical-specific isolation transformer
- Precision measurement
- Radar
