ADM8690ARNZ
| Parameters | |
|---|---|
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM8690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 400mW |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
ADM8690ARNZ Overview
A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 2 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. 8 pins are present in total in this power management. Pin count of the power management is 8. IC management can only work with a supply voltage of 4.75V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 200μA. You can always use ADM8690, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum supply temperature that PMIC chip can work with is 200μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM8690ARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
200μA operating supply current
ADM8690ARNZ Applications
There are a lot of Analog Devices Inc. ADM8690ARNZ Voltage Supervisors applications.
- Important electronics for automotive protection
- Stable power system
- Efficient information transmission
- Power distribution systems of ICU
- Functional modules
- Battery cars
- Battery-powered equipment
- Transformer load monitoring equipment
- Satellite navigation
- Network equipment
