ADM8691ARNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM8691 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 600mW |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.73V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.73V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8691ARNZ Overview
As you can see, this power management is mounted through 16 terminals. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. Please find attached 16-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. There are a total of 16 pins on power management. 16 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.75V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Push-Pull during operation. In order to maintain a stable supply current for the power management, 200μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by ADM8691. To be able to work, this power management requires 5V volts of power. A maximum supply temperature of 200μA can be used. On the power management, 1 inputs are monitored.
ADM8691ARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
200μA operating supply current
ADM8691ARNZ Applications
There are a lot of Analog Devices Inc. ADM8691ARNZ Voltage Supervisors applications.
- Stable power system
- Urban rail transit weak current power monitoring
- Detection of phase imbalance
- Display equipment
- Consumer electronics
- Microprocessor system
- Magnetic resonance imaging
- Unattended substation automation
- DVR
- Automotive permanent magnet synchronous motors
