ADM8692ARNZ
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM8692 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 200μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Supply Current-Max (Isup) | 0.2mA |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.48V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
ADM8692ARNZ Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 2 channels. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins are on the supervisor. IC management can only work with a supply voltage of 4.5V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. A similar IC managements number of the manufacturer can always be found by using ADM8692, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.
ADM8692ARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
ADM8692ARNZ Applications
There are a lot of Analog Devices Inc. ADM8692ARNZ Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- Kitchen appliances
- Low voltage/high power - AI, GPU
- Microcontroller system
- Set top box
- Rechargeable batteries
- Functional modules
- Analog circuit
