ADM8693ANZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADM8693 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 200μA |
| Power Dissipation | 600mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Supply Current-Max (Isup) | 0.2mA |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.48V |
| Height Seated (Max) | 5.33mm |
| Length | 20.07mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADM8693ANZ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 2 channels. There are 16-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at NOT SPECIFIED. When 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is provided by Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 16. 16 pins make up the power management. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. For similar manage ics search of the manufacturer, you can always refer to ADM8693, the base PMIC number. In order to operate this power management, it requires 5V volts of power.
ADM8693ANZ Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
ADM8693ANZ Applications
There are a lot of Analog Devices Inc. ADM8693ANZ Voltage Supervisors applications.
- Cloud computing
- Personal computers
- Efficient information transmission
- Computer applications
- Military communications
- Functional modules
- Utility meter
- Insulation fault location system
- Leakage protection
- Consumer electronics
