ADM8696ARWZ-REEL
| Parameters | |
|---|---|
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM8696 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Power Dissipation | 600mW |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.3V |
| Reset Timeout | 35ms Minimum |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 70 ms |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
ADM8696ARWZ-REEL Overview
Power management is mounted through 16 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 16. 16 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. Supplied with a operating current of 200μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to ADM8696, the base PMIC number. To operate this power management, you will need at least 3.3/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 200μA. There are 1 inputs monitored at once on the power management.
ADM8696ARWZ-REEL Features
Battery Backup Circuit type
Minimum supply voltage of 3V
200μA operating supply current
ADM8696ARWZ-REEL Applications
There are a lot of Analog Devices Inc. ADM8696ARWZ-REEL Voltage Supervisors applications.
- Linux and server computing
- Battery cars
- Functional modules
- Smart meter
- Insulation fault location system
- Network equipment
- Analog circuit
- Sensitive sensors
- Set top box
- Rechargeable batteries
