ADM8699ANZ
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ADM8699 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8699ANZ Overview
This power management consists of 8 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be NOT APPLICABLE. IC management conducts at a voltage of 5V. Through Hole is the one that mounts power management. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The power management's supply current is 100μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM8699, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 100μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM8699ANZ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
100μA operating supply current
ADM8699ANZ Applications
There are a lot of Analog Devices Inc. ADM8699ANZ Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Sensitive sensors
- Magnetic resonance imaging
- Detection of phase loss
- Utility meter
- Network equipment
- DSP
- Transformer load monitoring equipment
- Efficient information transmission
- Battery cars
