ADM8699ARNZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM8699 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height Seated (Max) | 2.59mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8699ARNZ-REEL Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. Surface Mount mounts IC management. There are a total of 8 pins on power management. 8 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 100μA. It is always advisable to use ADM8699, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 100μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.
ADM8699ARNZ-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
100μA operating supply current
ADM8699ARNZ-REEL Applications
There are a lot of Analog Devices Inc. ADM8699ARNZ-REEL Voltage Supervisors applications.
- Detection of phase sequence
- Automotive power systems
- Embedded computing
- Urban rail transit weak current power monitoring
- Radio
- Smartphones
- Battery-powered equipment
- Important electronics for automotive protection
- Important electronics for automotive safety
- Kitchen appliances
