ADM8843ACPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 20mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADM8843 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Efficiency | 88 % |
| Output Voltage | 4.81V |
| Max Output Current | 20mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.6V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 2mW |
| Output Current | 20mA |
| Max Supply Current | 5mA |
| Max Output Voltage | 4.81V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.6V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 20mA |
| Max Output Power | 2mW |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1.5MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.9mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM8843ACPZ-REEL7 Overview
Additionally, there is a 16-VFQFN Exposed Pad, CSP package for saving space.It has 4 outputs for LED drivers.As far as mounting is concerned, Surface Mount is adopted.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.There are many benefits for Backlight, Camera Flash.A termination of 16 is used to operate the LED driver.The base of this board is configured as 16 pins.A total of 4 segments are estimated.On the Surface Mount, a device is mounted.LED drivers are found under the base part number ADM8843.It is acceptable to supply voltages of 5.5V volts.A device with 16 pins is available.In addition, it can be classified as Display Drivers according to its characteristics.This device operates with a minimum input voltage of 2.6V volts.A minimum supply voltage of 2.6V is required to meet the highest efficiency standards.In the case of supply current, there is a maximum value of 5.5V.In order to maintain maximum efficiency, the supply current cannot exceed 5mA.The load is capable of receiving 20mA current.The electronic component can function fully when the switching frequency is maintained at 1.5MHz.Even when operating at a maximal output current of 20mA, it is capable of delivering all the benefits of a LED driver.The voltage at the output terminal is 4.81V.It is important that the output voltage does not exceed 4.81V.
ADM8843ACPZ-REEL7 Features
Available in the 16-VFQFN Exposed Pad, CSP package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 1.5MHz
Output voltage of 4.81V
ADM8843ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM8843ACPZ-REEL7 LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Sports Facility Lighting
- Amusement Machines
- Down lights
- Street lighting
- Linear fluorescent
- Down lighting
- Replacement lamps
- Industrial LED Lighting: Image Recognition Devices
- LED Lighting PFCs, Linear Dimmable
