Parameters |
Efficiency |
88 % |
Output Voltage |
4.81V |
Max Output Current |
30mA |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.6V |
Nominal Supply Current |
5mA |
Power Dissipation |
2mW |
Output Current |
30mA |
Max Supply Current |
5mA |
Topology |
Switched Capacitor (Charge Pump) |
Min Input Voltage |
2.6V |
Max Input Voltage |
5.5V |
Output Current per Channel |
30mA |
Internal Switch(s) |
Yes |
Dimming |
PWM |
Number of Segments |
6 |
Switching Frequency |
1.5MHz |
Multiplexed Display Capability |
NO |
Height Seated (Max) |
1mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad, CSP |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
DC DC Regulator |
Terminal Finish |
Matte Tin (Sn) |
Applications |
Backlight, Camera Flash |
HTS Code |
8542.39.00.01 |
Subcategory |
Display Drivers |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADM8845 |
Pin Count |
16 |
Number of Outputs |
6 |
ADM8845ACPZ-REEL7 Overview
Board space is saved by its 16-VFQFN Exposed Pad, CSP package.In this LED driver, there are 6 outputs.Surface Mount is used for mounting the led light driver.It emerges as a DC DC Regulator, which is efficient and reliable.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight, Camera Flash has many advantages.16 terminations are used in its operation.This module has 16 pins as its base.It consists of 6 segments.The mount is in the way of Surface Mount.The LED driver can be found under the base part number ADM8845.The voltage of 5.5V is acceptable.There are 16 pins on this device.Furthermore, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 2.6V.A minimal supply voltage of 2.6V is required for it to achieve the highest efficiency.When the maximum supply current is allowed, it reaches 5.5V.When the supply current should be less than 5mA, the device will provide high efficiency.A load can be supplied with 30mA current.This electronic component may perform its functions fully if the switching frequency is maintained at 1.5MHz.Even when operating at a maximal output current of 30mA, it is capable of delivering all the benefits of a LED driver.Currently, it is generating 4.81V voltage.
ADM8845ACPZ-REEL7 Features
Available in the 16-VFQFN Exposed Pad, CSP package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 1.5MHz
Output voltage of 4.81V
ADM8845ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM8845ACPZ-REEL7 LED Driver ICs applications.
- OLED power supply for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Inspection Devices
- A- lamps
- Refrigeration lighting
- LED headlights
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems