ADM9690ARNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Watchdog Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM9690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.3V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 400mW |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.31V |
| Reset Timeout | 10ms, 50ms Typical |
| Min Reset Threshold Voltage | 4.2V |
| Max Reset Threshold Voltage | 4.42V |
| Undervoltage Threshold | 4.2V |
| Overvoltage Threshold | 4.42V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 75 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM9690ARNZ Overview
Power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Watchdog Circuit manage ics. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 5V supply voltages. The power management is mounted by Surface Mount. The total number of pins on this power management is 8. Pin count of the power management is 8. A voltage (Vsup) that doesn't fall below 4.3V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 100μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM9690, which is the base power ics number. The power management can work with a maximum supply temperature of 100μA. On the power management, there are a total of 1 inputs that are monitored.
ADM9690ARNZ Features
Watchdog Circuit type
Minimum supply voltage of 4.3V
100μA operating supply current
ADM9690ARNZ Applications
There are a lot of Analog Devices Inc. ADM9690ARNZ Voltage Supervisors applications.
- Medical-specific isolation transformer
- Solar power charger
- Microprocessor system
- Radio
- Set top box
- Telecommunications equipment
- Power communication system
- Smart meter
- Rechargeable batteries
- FPGA design
