ADN2892ACPZ-RL7
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~95°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | ATM/SONET/SDH ICs |
| Max Power Dissipation | 160mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADN2892 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 50mA |
| Power Dissipation | 160mW |
| Supply Current-Max | 0.054mA |
| Max Output Voltage | 700mV |
| Data Rate | 4.25 Gbps |
| Amplifier Type | Limiting |
| Voltage - Supply, Single/Dual (±) | 2.9V~3.6V |
| Input Offset Voltage (Vos) | 100μV |
| Voltage Gain | 51dB |
| -3db Bandwidth | 1.5GHz |
| Telecom IC Type | TELECOM CIRCUIT |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADN2892ACPZ-RL7 Overview
A 16-VFQFN Exposed Pad, CSP case is used to package the op amp. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 16h termination of the year. The pins on this board total to 16 in total. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of ATM/SONET/SDH ICs. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 100μV for this buffer op amp. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~95°C . An 50mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 51dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 3.3V. It is important that the linear amplifier resistance stays within the range of 50Ohm. Linear amplifiers using telecom IC types TELECOM CIRCUIT are used.
ADN2892ACPZ-RL7 Features
16 Pins
supply voltage of 3.3V
51dB voltage gain
Output Type: Differential
Resistance of 50Ohm
ADN2892ACPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADN2892ACPZ-RL7 Instrumentational OP Amps applications.
- Active probe
- Automation control systems
- Automotive sensors
- Power control
- Band-stop filter
- Medical imaging
- Commercial audio systems
- Automatic control
- Multiplication circuits
- Car stereo
